QMS – ISO 9001 specifies requirements for a quality management system. It refers to delivering products and services as meeting customer and applicable regulatory requirements, as well as enhancing customer satisfaction through effective application of the system, including process for continual improvement of the business system and the assurance of conformity to customer and applicable statutory regulatory requirements.
EMS – ISO 14001 is an environmental management standard. It defines a set of requirements for environmental management systems. The purpose of this standard is to support organizations in protecting the environment from Fiberglass dust, to prevent pollution, and to improve our environmental performance, ensuring our products remain environment friendly at our customer’s site.
The BSI Kitemark is a registered certification mark owned and operated by British International Standard. The Kitemark certification is symbolizes FUTURE PIPE INDUSTRIES ’s products and services quality and safety whilst demonstrating commitment, offering value to our customers, business and procurement practices. Future Pipe Industries was the first company in the Middle East to receive the Kitemark certificate.
OHSAS 18001 is an occupational health and safety management standard that defines a set of occupational health and safety (OH&S) management requirements for occupational health and safety management systems (OHSMS). This standard helps organizations to manage and control their occupational health and safety risks and to improve their occupational health and safety performance.
AENOR is responsible for developing standards and carrying out standardization and certification operations in Spain. Over 18,000 published standards cover all industrial and service sectors, and are designed to improve quality, competitiveness and environmental protection. AENOR is also a member of the International and European Standardisation Organisations IEC and ISO, participating in their governing bodies and the work carried out by their technical bodies.
American Bureau of Shipping (ABS) type approval is a product certification (Design Assessment) for Future Pipe Industries FIBERSTRONG, WAVISTRONG, and FIBERMAR product line for shipboard and offshore piping systems. The assessment is a representation by the Bureau as to the degree of compliance the design exhibits with applicable sections and rules.
Bureau Veritas BV is a Type Approval Certificate achieved by Future Pipe Industries for product lines (Glass Reinforced Epoxy Pipe Systems) catering to the Marine division which includes requirements for classification of steel pipes and offshore units.
LR (Lloyds Register) Type Approval Certificate for Epoxy based piping system which is an impartial certification service providing independent third-party Type Approval certificates attesting to a product’s conformity with specific standards or specifications, and verification of an appropriate production quality system.
DNV GL (Det Norske Veritas and Germanischer Lloyd) is a Type Approval Certificate possessed by Future Pipe Industries for product lines (WAVISTRONG and FIBERMAR) pipe systems complying with FRTP pipe systems for offshore Standards, rules for Classification of Ships, and guidelines for application of pipes on ships. This piping system is being approved for fire endurance.
RINA is a Type Approval Certificate that Future Pipe Industries holds for its GRE piping systems certifying the EMT (Non-Conductive) and CMT (Conductive) products complying with its regulations.
NSF/ANSI Standard 61 is for drinking water system components. The Standard that establishes minimum health effects requirements for material components, products or systems that contact drinking water, drinking water treatment chemicals or both. *Only products bearing the NSF Mark are Certified.
WRAS (Water regulation advisory scheme) a product certificate that Future Pipe Industries holds for its GRP/ GRE Piping system for transmission of portable water.
KIWA is a product certificate achieved by Future Pipe Industries for its FRP piping systems mainly for transportation of drinking water and for transportation of sewage and waste water.
Future Pipe Industries is an approved supplier of The Drinking Water Inspectorate (DWI). The DWI was formed in 1990 to provide independent reassurance that water supplies in England and Wales are safe and drinking water quality is acceptable to consumers.
Belgaqua is a product certificate for Future Pipe Industries product lines which declares Acceptance of Materials in contact with drinking water and water intended for production of drinking water (HYDROCHECK).
WSAA (Water Services Association of Australia) Future Pipe Industries is a member of the WSAA as a company who have an interest allied to the urban water industry.
SNI stands for Standar Nasional Indonesia (Indonesian National Standard). It is a standard drafted and determined by the National Standardization Agency of Indonesia (BSN) and Technical Committee on goods, services, system, process, and personnel in the territory of Indonesia.
SNI is the only standard that is applied to products and services nationally in Indonesia and is used to determine the conformity of the standard quality of a product. SNI is obtained via a third–party product certification system with specified requirements. These requirements include product sample testing, quality system assessment and surveillance during the entire process.
FM (Factory Mutual) is an approval report/certificate for Future Pipe Industries underground product line (Pipes & fittings) for Underground Fire Protection service under the examination of Factory Mutual Research Approval Standard 1614.
ESMA (Emirates Authority for Standardization and Metrology) certify that Future Pipe Industries FRP piping system complies to specific rules for Fiberglass Reinforced Buried Pressure Pipes.
UL (Underwriters Laboratories Inc.) a product certificate secured by Future Pipe Industries for its Underground Fuel Storage Tanks.
SIRIM QAS International is the first Certification Body in the country to obtain accreditation from the Department of Standards Malaysia (STANDARDS MALAYSIA) for Product Certification Scheme against the ISO/IEC Guide 65 – General Requirements for Bodies Operating Product Certification Systems.
Future Pipe Industries is a member of The Dubai Chamber. In 2017 and 2018 we applied for and received The Dubai Chamber CSR Label. The assessment covers the main impact areas of Sustainability and CSR: Environment, Community, Workplace, and Marketplace, and it provides recognition for companies implementing outstanding CSR and Sustainability practices in the GCC region.